Winstar W10 Flash File SC6531 (Firmware) 100% Tested

  Winstar W10 Flash File SC6531 (Firmware) 100% Tested

Hello GSM friends! Are you searching for the Winstar W17 flash file? You’ve come to the right place. Here, you can easily download the flash file, which is 100% tested and safe. This flash file can resolve various issues such as hang logos, dead recovery, IMEI repair, password unlocking, and more. On this webpage, you’ll find the flash file along with a step-by-step guide on how to flash it onto your mobile device, complete with a download link.

Winstar W10Flash File SC6531E

To flash the Winstar W10 flash file, you’ll need a flashing tool like InfinityBox CM2SCR. The flashing process is relatively straightforward, but it’s crucial to follow the instructions carefully to avoid bricking your device. Before proceeding, ensure that your phone matches the specifications, including the correct CPU model.

Winstar W10 Flash File Reading Info

Operation : Read Flash [ v1.03 ]

1. Power off device

2. Press and hold BootKey or use BootCable

3. Insert cable and battery in device!

Wait for device ... 

Device Connected!

BootVersion : SPRD3

BootSource  :  InternalLibrary

BootVersion : Infinity SCR SC6531E Loader v 1.2

Port speed : 921600

FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Ok, 4194304 bytes

Saved to : C:\Users\ABUL KASHEM\Desktop\SC6531_SPI_WINBOND_W25Q_4MiB.bin

Done!

Elapsed: 00:00:37

Reconnect Power/Cable!

Winstar W10 Flash File Download Link

• Device Model: Winstar W10
• CPU Type: SPD SC6531E
• File Size: 4MB
• Version: SC6531_SPI_WINBOND_W25Q_4MiB
• Compressed: WinRAR And 7Zip
• Password: Paid 

Winstar W10 Boot Key

These boot keys are used for flashing firmware and unlocking passwords on a Windows PC via a USB cable. Primarily, they are designed for Chinese SPD CPU mobile phones.

How to Find the Boot Key on Button Phones:

The boot key for this model is: “Use SPD Boot Cable“

How to Flash Winstar W10Phone

1. Download the Winstar W0Flash File Firmware.
2. Install the Winstar W10 USB Driver on your computer. If the driver is already installed, skip this step.
3. Open the Winstar W10 Flash Tool (CM2 / Miracle Box).
4. Remove the battery from the device and then reinsert it.
5. Select the downloaded flash file and click the Write Flash option.
6. Connect your device to the computer via a USB cable and press the boot key.
7. The flashing process will begin. Wait for up to 5 minutes.
8. Once the flashing reaches 100%, the process is complete.

Congratulations! Your Winstar W10 mobile device has been successfully flashed.