Tensile T4 Flash File SC6531E (Firmware) 100% Tested=ABUL KASHEM

 

Tensile T4 Flash File SC6531E (Firmware) 100% Tested=ABUL KASHEM

Tensile T4 is a feature phone that runs on the SC6531E chipset. If you are looking to flash your Tensile T4 phone, you will need to download the Flash file for your device. In this case, you must download the Flash file for Tensile T4 The flash file will help you to fix any software issues on your phone, such as boot loops, stuck-on logos, or other problems. In this article, we will guide you on how to download the Tensile T4 flash file and how to flash it using the InfinityBox CM2SCR tool on your device.

Tensile T4 Firmware Download

Tensile T4 Official Flash File (Stock Firmware) is Now available for Your Device and You Also can download it from under. What are the possible issues with the Tensile T4 mobile phone, how to solve them, and what tools to eliminate them? Therefore why don’t we begin? Let us find out precisely what a flash file is? And what exactly does it do? The reason it’s essential.

You may stick to along with and flash your apparatus successfully. Additionally, here thoroughly explain the flashes that need installing and using principles. Do not worry about studying this article carefully and then flash your Tensile T4 and many others the same type of mobile apparatus.

Tensile T4 Flash File Reading Info

Operation : Read Flash [ v1.03 ]

1. Power off device

2. Press and hold BootKey or use BootCable

3. Insert cable and battery in device!

Wait for device ... 

Device Connected!

BootVersion : SPRD3

BootSource  :  InternalLibrary

BootVersion : Infinity SCR SC6531E Loader v 1.2

Port speed : 921600

FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Ok, 4194304 bytes

Saved to : C:\Users\Administrator\Videos\SC6531_SPI_WINBOND_W25Q_4MiB.bin

Done!

Elapsed: 00:00:37

Reconnect Power/Cable!

Tensile T4 Boot Key

These mobile’s boot keys are used during the flashing and unlock password or Pincode process in your Windows PC Via USB Cable. First and foremost, Chinese Spd Cpu mobile phones use these boot keys. These are methods used to locate the boot key on Button Mobile. Boot Key: “Use SPD Boot Cable”

How to Flash Tensile T4 Phone:

• First Download Tensile T4 Flash File Firmware.
• Then Install Tensile T4USB Driver On Your Computer, If You Already Have A USB Driver Installed Skip This Step.
• Open Tensile T4 Flash Tool (CM2 / Miracle Box).
• Tensile T4 Battery Remove And Then Insert Battery.
• Select The Downloaded Flash File Then Click the Write Flash Option.
• Connect your device to the Computer Via USB Cable And Press Boot Key.
• Now Tensile T4 Flash Processing Start, Now Wait Up To 5 Minutes.
• Wait For Flashing 100% Done.
• Congratulations! Now Your Tensile T4 Mobile Is Flashing Complete.

Tensile T4 Firmware Advantage

• Unbrick Tensile T4 with Stock ROM.
• Flashing stock ROM to fix boot loop.
• Tensile T4Upgrade And Downgrade.
• Fix network issue.
• Unroot your phone to fix bugs.
• To Reset or Remove Phone Security Lock.
• Fix Hang On Logo Tensile T4
• Flashing Stock ROM can fix software issues.
• Restore Your Warranty by going to Stock.